The food vacuum packaging machine needs frequent maintenance to ensure its normal operation, and pay attention to many key points during the entire maintenance process. It is not necessary to only do surface work, especially the cleaning of the equipment components, which must be ensured. FONFAR in Jiaozuo will give you a detailed introduction to the solenoid valve of the food vacuum packaging machine to be removed and cleaned every 2 months. The cleaning methods are as follows:
1. Remove the solenoid valve;
2. Open the solenoid valve, put the high-pressure gate valve, oil circuit board, transformer core and tension spring into 90# automotive gasoline, and clean it;
3. Dry the gasoline on each part, and the equipment should be in the order of equipment, and a very small amount of grease should be applied before the transformer core equipment;
4. Connect the power supply test. If the valve is violently shocked or announces strange noises, you should remove the oil circuit board from the beginning and turn the transformer core over to the inevitable focus point before the equipment is installed. Connect the power supply to test until there is no noise.
When we use the food vacuum packaging machine, we must carry out cleaning. When we clean the food vacuum packaging machine, it can reasonably extend the time and improve the service life.
