Heat shrink packaging machines need to consider several aspects:
The first item we need to determine is the type of shrinking machine, then the second item we need to determine is the model of the machine. The model of the machine is basically determined according to the size of the product. Generally, the size of the shrinking furnace of the shrinking machine should be left and right and up and down. It should be larger than about 10cm of the product, so as to ensure that the product passes through the shrinking machine well.
Although we can basically determine the type of shrinking machine after the first two, but this is not necessarily the most economical, and it is necessary to finally confirm whether the model is suitable according to the customer's output. If it is not suitable, then there should be more Economical solution.
The packaging films on the market are roughly divided into three types: POF, PVC and PE. For these three films, the first two can be shrunk with the same shrinking machine, while the PE film must be shrunk with its own shrinking machine. , because the film is relatively thick, the required heating temperature is relatively high.
This kind of packaging machine can reduce the cost by 30% compared with carton packaging. The heat shrinkable packaging machine is a very promising packaging form. Among them, the cuff heat shrink packaging machine can completely replace the carton or the heat shrink semi-pallet box.
.
