1. The operator should pay attention to the safety of himself and others at any time during the operation to prevent the occurrence of safety accidents.
2. The operator can only operate the touch screen of the machine with a clean finger, and it is strictly prohibited to press or tap the touch screen with fingertips, nails, or other hard objects.
3. When debugging the machine or adjusting the quality of the bag making, the quality of the bag opening, the filling effect, the car display bag and the bag, only the manual switch can be used for debugging. It is strictly forbidden to carry out the above debugging when the machine is in operation to avoid the occurrence of safety accidents. . For larger faults that need to be debugged and to open the cam box to adjust the cam or change the spring, etc., you must first hang the "under repair, no start-up" safety warning sign on the touch screen of the machine operation, and anyone sees a safety warning Cards must not be turned on at will, otherwise the consequences will be at your own risk.
4. Each operator shall ensure the sanitation of the machine and the surrounding ground at any time, and clean the ground and the machine in a timely manner. Films, cartons and other debris shall not be placed around the machine at random, and non-conforming products and debris plastic baskets shall be placed in a standardized manner to keep the site tidy.
5. The operator of the CIP cleaning system should clean up at any time to keep the platform hygienic, and pay attention to whether the conveyor belt deviates at any time. If the conveyor belt deviates, correct the deviation immediately to avoid damage to the conveyor belt.
6. After the production of each shift, the operator must clean the sanitation of the machine and equipment. During the cleaning process, it is strictly prohibited to rinse the equipment with large water or high-pressure water (except for the special small water gun configured for each machine), and pay attention to protection Good electrical parts. After cleaning, make sure that the machine and the ground can leave without water.
