Filling machines are mainly a small type of products in packaging machinery. From the perspective of materials, they can be divided into many types. The operation is very simple. However, in addition to the basic chip detection, it is necessary to pay attention to it, and it must be carried out step by step according to the requirements. This will avoid problems.
Filling machine operation requirements:
1. Before operating the filling machine, it is necessary to clearly understand the requirements of the automatic filling production line and the manual of the filling machine. First read the manual again, and be familiar with the adjustment and use of the filling machine. Strictly operate according to the instructions of the filling machine, pay attention to the details, and the details must determine the success or failure.
2. Operation requirements of the filling machine: Regularly repair and maintain the machine according to the instructions, and rub oil on the body of the filling machine, so that the body of the filling machine is protected by an oil layer as much as possible, which can isolate the air and avoid filling. The installed machine is rusted, which well protects the body of the filling machine, which is also a way to prolong the service life of the filling machine.
3. We should also pay attention to the cleaning of the sealing varnish of the hot-pressing frame, do not keep foreign objects on it, and ensure that the filling machine is as clean as possible, so as to avoid corrosion caused by leaving the material at the inlet for a long time.
4. We need to check the machine frequently to see if the contact of various parts of the machine is good. Be sure to use electricity safely to prevent damage caused by incorrect electricity use.
5. Before cleaning the piston filling machine, the remaining products in the filling machine should be removed, and then the material barrel should be filled with gentle cleaning liquid. Fengfa Machinery recommends using warm water. Use soapy water, alcohol or other cleaning solution if needed.
