Paste filling machines are very common in today's society, and everyone is not unfamiliar with them. However, if you want to find out the original ideals of the work, everyone is still a little understanding. Today, I will tell you what is the working principle of the paste filling machine?
Propelled by the mechanical equipment of the transmission system, many aspects can cooperate with each other and have a clear division of labor, and the actual effect of linkage is really achieved. There is also a unique infrared sensor on the feeding track to receive the induction. When the bottle exceeds the corresponding number, it will block the back bottle by itself. When the front bottle is full, it will release by itself to fill the vacancy in the back bottle. There are no filled bottles. When the bottle enters the specific position below the filling head, other working parts are suspended, and only the filling head works.
When the bottle leaves, the filling head stops working, the track part works, and the bottle cap is released. The clean bottles from the bottle cleaning equipment are sent to the bottle feeding screw of the filling machine by the bottle conveying belt, and then sent to the bottle fixed cylinder of the turntable by means of the bottle feeding star wheel and rises up. Under the correct guidance of the centering equipment, the bottle mouth firmly presses the filling mouth of the filling valve to produce a good seal.
After emptying the bottle, the back pressure gas (CO,) in the liquid storage tank rushes into the bottle. When the air pressure in the bottle is equal to the standard air pressure in the liquid storage tank, the liquid valve opens under the effect of the liquid valve spring. At this time, the objects are correctly guided by the umbrella-shaped reflection ring on the return air duct. It will pour into the glass bottle along the bottle wall by itself. The carbon monoxide in the glass bottle is sent back to the liquid storage tank through the return ventilation duct. When the item rises to a corresponding height and closes the air inlet port. Pause the target yourself. Then turn off the liquid valve and the gas valve, and discharge the pressure gas in the neck of the bottleneck to prevent the glass bottle from falling down and the gas-filled items are sprayed out, thereby realizing a whole filling process.
