Although the failure rate of the sealing machine is very low, there will be various small problems if you are not familiar with it. Then read the following points. Compared with the problems encountered by the packaging machinery and equipment, you will be able to solve them yourself and save time. .
1. The tape cannot glue the box
Possible reasons: a. The main spring is too loose; b. The glue accumulated on the roller shaft cannot work normally; c. The tape is unqualified.
Solution: Tension the main spring, smooth those roller shafts, replace the tape
2. The box got stuck halfway
Possible reasons: a. The adjustment nut of the tape wheel is too tight; b. The height of the box is not adjusted properly; c. The automatic spring is too tight.
Solution: Loosen the belt wheel adjustment nut, adjust the height from the beginning, and loosen the main spring.
3. The tape is broken during the sealing process
Possible reasons: the blade protrudes too long;
Solution: Adjust the blade orientation.
4. The tape is not on the center line
Possible reasons: the one-way wheel is broken;
Solution: replace the one-way wheel.
As an indispensable supporting equipment in intelligent packaging machinery and equipment, the sealing and packing machine is widely used. With the promotion of automated packaging workshops, it has also developed rapidly, especially in some special industries, such as products that affect human health. Enterprises can control fully automatic packaging machinery and sealing and packaging lines through computers to realize unmanned workshops.
