Disinfect and rinse
1. Loosen the upper and lower fixing screws, remove the liquid injection system for overall disinfection, or disassemble for disinfection and cleaning separately.
2. Put the liquid inlet pipe into the cleaning solution and start cleaning.
3. There may be errors in the actual filling of the 500ml model, and the measuring cylinder should be measured before the official filling.
4. Filling machine needle tube, 10 type standard 5ml or 10ml syringe, 20 type 20ml glass filling machine, 100 type 100ml glass filling machine.
Installation Precautions
1. After the machine is unpacked, first check whether the random technical data is complete and whether the machine is damaged during transportation, so as to solve it in time.
2. Install and adjust the infeed and outfeed parts according to the outline drawings in this manual.
3. Add new lubricating oil at each lubrication point.
4. Turn the machine with the crank to check whether the machine is running in the correct direction (counterclockwise when facing the motor shaft). The machine must be protected and grounded.
