The choice of pellet packaging machine has always been one of the concerns of the food, pharmaceutical and chemical industries. Many manufacturers have found that due to the purchase budget of the site and equipment, in the actual production after the use of a small footprint and low-cost pellet packaging machine, there are two requirements for the effect of packaging powder materials and the compatibility of material types. Most of these devices are not satisfactory. So, how to solve the problem of sprinkling of granular packaging machine?
First of all, the particles of powder products are very small, and it is easy to produce powder "counterattack" during the packaging process. The "counterattack" phenomenon will cause the packaging to be sealed and pollute the working environment to a certain extent. Since the pellet packaging machine is a vertical blanking machine, the distance between the blanking opening and the bottom of the packaging bag is relatively large, and the packaging is performed during packaging. During the blanking process, the material slides the packaging material into the bag as a "slide". If the powder is lifted, it will contaminate the seal and prevent the seal from being sealed. As a result, the quality of the product is often affected.
The granule packaging machine adopts the filling method of bagging first and then unloading. The discharge port can go directly into the bottom of the bag to prevent dust. If the powder particles are extremely fine and easy to lift, you can also install a suction device at the upper seal to absorb a small amount of powder absorbed by the bag mouth. In addition, the granule packaging machine uses five horizontal seals to enhance sealing. This design can completely solve the "counterattack" phenomenon, and to a large extent ensure the tightness of the seal, thereby effectively extending the shelf life of the product.
Secondly, when manufacturing mixed materials, manufacturers often encounter such problems: usually, different customers’ soups have their own unique recipes, and the correct ratio of the recipes determines the pure taste. Since vertical packaging equipment cannot increase the number of stations on the equipment, materials must be pre-mixed before filling. However, in actual production, the mixing ratio of the actual product usually does not match the formula ratio.
Due to the characteristics of the horizontal walking bag, the pellet packaging machine can meet the manufacturer's requirements for increasing the number of workstations. In theory, the particle packaging machine can increase the number of stations indefinitely. In the process of bag walking, different materials can be loaded into each bag one by one through different feeding devices to ensure the accuracy of the formula.
