1. Drive advantage
The standard product uses a belt pulley to drive a cycloid reducer. Compared with the large torque of a gear reducer, the elastic connection of the belt drive has the advantage of protecting the transmission components when overloaded.
2. Flexible disassembly and assembly
The ribbon main shaft is connected with the drive shaft flange in the cylinder body, and can be quickly disassembled when the mixing shaft needs to be repaired or replaced. The flexible disassembly and assembly design makes the U-shaped cylinder and the two end plates completely welded, avoiding the material accumulation gap caused by the large flange connection of the cylinder, and reducing the residue.
3. Disconnected ribbon
Compared with continuous spiral belt, the shearing motion of the broken spiral belt is larger, and the material can form more eddy currents in the flow, which speeds up the mixing speed and improves the uniformity of the mixing.
4. Discharge form
The discharging form is generally a pneumatic (manual) flap valve. The arc valve is tightly embedded in the barrel and flush with the inner wall of the barrel. There is no material accumulation and mixed dead angle phenomenon. The reliable side strip seal ensures that there is no leakage during frequent switching. phenomenon.
5. Cooling and heating
A jacket can be added to the outside of the mixer barrel, and the material can be cooled or heated by injecting cold and hot media into the jacket; cooling is generally pumped into industrial water, and heating can be passed into steam or electric heating heat transfer oil.
6. Spindle seal
When mixing ultra-fine powder, the main shaft sealing form can increase the air-tight setting, effectively blocking the flow of air and powder inside and outside the cylinder.
