First, plug one end of the power cord of the aluminum foil sealing machine into the socket on the back of the machine, and plug the other end into the socket of the wire version. Be sure to use a single-phase three-wire power supply. In order to ensure the safety of operators, the ground of the workplace must be dry and non-conductive and insulated.
Secondly, turn on the main power switch on the chassis board and wait for the green indicator light to turn on, and the aluminum foil sealing machine will start to work. Adjust the setting button and set it to an appropriate value, generally between 0.5 and 2.0 seconds. At this time, the induction head of the induction machine is placed on the product cover and the start button is pressed. At this time, the heating red indicator light is on, indicating that it is heating. Do not remove the induction head. Remove the induction head after the red indicator light is off. At the same time, pay attention that the operator's hand cannot be put into the induction layer, the electromagnetic effect will be generated, which will be dangerous. After the green indicator light is on or the buzzer in the machine beeps, the next sealing work can be carried out.
