Filling machine maintenance skills are as follows:
1. Its cleanliness is a problem that we must pay attention to. The filling containers used are strictly inspected and cleaned, so that the filled products can be guaranteed to be safe. In addition to the cleaning of the meat sauce filling machine and jam filling machine, it is of course necessary to keep the filling workshop clean and tidy. Because it is taboo in the production process that the production line cannot run normally due to the quality problems of the filling machine itself, so when using the meat sauce filling machine and jam filling machine, it is necessary to pay attention to sterilization and ensure cleanliness.
2. Keep the pipelines of the meat sauce filling machine and jam filling machine clean. All pipelines, especially the pipelines that are in direct or indirect contact with the sauce, must be kept clean, cleaned every week, drained every day, and extinguished every time. Bacteria; ensure cleanliness, brush and sterilize the sauce tank to ensure that there is no fouling and bacteria in the parts that are in contact with the oil.
3. Observe the moisture filter and oil mist device of the pneumatic combination two-piece every day. If there is too much water, it should be removed in time, and if the oil level is not enough, it should be refueled in time;
4. Always observe the mechanical parts during production to see whether the rotation and lifting are normal, whether there is any abnormality, and whether the screws are loose;
5. Frequently check the ground wire of the equipment, and the contact requirements are reliable; clean the weighing platform frequently; check whether there is any air leakage in the pneumatic pipeline and whether the air pipe is broken. 4. Replace the lubricating oil (grease) for the motor of the reducer every year, check the tightness of the chain, and adjust the tension in time.
6. If it is not used for a long time, the material in the pipeline should be emptied.
7. Do a good job in cleaning and sanitation, keep the surface of the machine clean, often remove the accumulated material on the scale body, and pay attention to keeping the electric control cabinet clean.
8. The sensor is a high-precision, high-seal, and high-sensitivity device. It is strictly prohibited to be impacted and overloaded. It must not be touched during work. It is not allowed to disassemble unless it is necessary for maintenance.
