The fully automatic label paste machine has been widely used in food, medicine, daily chemical and other industries because of its powerful functions. The conveyor belt is one of the important components of the labeling machine, carrying the transmission of the labeling product, so it is also important to do the maintenance of the conveyor belt. If it is well maintained, it can greatly extend its service life: then we use it in our use How should it be maintained in the process?
1. Make sure that the belt is cleaned without any obstacles. If so, it should be removed in time.
2. The conveyor belt cannot be scratched to the side support or guardrail at work, and it must be adjusted in time.
3. The conveying belt cannot be adjusted too tightly, too tightly to increase wear.
4. When turning on the device, try not to put the product in, wait for the equipment to put the product under normal circumstances. Because the machine -device starts, the acceleration is relatively large, and the load can easily cause vibration. The load that is too large to the belt will affect its life.
5. Make sure that the conveying belt is running normally and does not go off. If you have to correct it in time to avoid uneven load.
6. Do not use abnormal gravity when placing the product to avoid aggravating the load.
7. The running speed of the transport belt should be worn too fast within the specified range.
8. Do not let the water or other chemical liquids on the belt, pour on it to avoid corrosion.
9. If the belt is abnormally stuck or breaks, please contact the label manufacturer service engineer immediately.
The conveying belt is a key component of the transmission of the labeling machine. The Fonfar machine warmly prompts to pay attention to maintenance before it will be durable and extend the service life of the machine. In fact, when we use a fully automatic labeling machine device, there is no special maintenance method for the conveyor belt. Can be used for a long time.
