The filling machine has a pivotal position in the current processing industry. It is one of the necessary equipment for the production and processing of many food, beverage, pharmaceutical, and daily chemical companies, and it plays an increasingly important role in our lives. For enterprises, the use of filling machines is not a problem, but few people know about its maintenance and maintenance.
First of all, before the filling machine, bottle washing machine and bottle washing machine are used,
1. Install and then debug, read the manual carefully before debugging, and prepare the tools used.
2. After the filling machine, bottle washing machine and bottle washing machine are installed, adjust the filling track and bottle receiving tray to the level, the liquid storage tank is full of materials, and all electrical switches are in the off position.
3. Insert the filled container into the tooling box and connect the external power supply. The power socket must be a three-pin socket and have a reliable grounding wire to prevent people from being shocked by the shell leakage. Turn the machine power switch to ON and the power indicator light is on.
4. The supporting plate of the mounting rack supports the filling rack, and the positioning sleeve on the filling head is pushed upward with the finger. The positioning sleeve should be able to move up and down flexibly, with the filling needle exposed or retracted without hindrance.
5. Turn the switch under the liquid storage barrel to the open position to enable the material to flow into the total metering pump. According to the total amount of each container filling, adjust the screw on the crank and turn the knob of the filling speed control plate to 20 degrees. Turn left and right, and then turn the switch on the filling speed control board to the on position.
6. When the liquid flowing out of the filling head is the set amount, tighten the liquid volume fine-tuning nut, cover the shell of the filling head, and loosen the supporting plate of the filling rack.
After the filling machine is used, pay attention to its maintenance. When disassembling and cleaning the piston and when maintaining, remove the fixing screws at the same time, so as not to affect the process requirements of the other when disassembling the first one. Before the piston filling machine is cleaned, the remaining product should be cleaned up, and then the material bucket should be filled with gentle cleaning liquid. The cylinder has been lubricated before leaving the factory, please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and hygienic. Power off when it is not working. In addition, while maintaining and using the filling machine correctly, it is also necessary to conduct regular inspections and debugging. Only in this way can the filling machine work healthily and stably.
With the continuous improvement of living standards, people's demand for beverages and daily chemical products continues to increase, and the company continues to develop. The use of beverage filling machines, bottle brushing machines and bottle washing machines is also increasing. The filling machine is in use. The problems that should be paid attention to are becoming increasingly acute. Therefore, in order to better produce the enterprise, its maintenance is still very necessary.
