Filling machine is one of the types of packaging machinery. It has a wide range of uses in life and is often used. However, due to long-term work, it will suffer some wear and tear. Here is a brief introduction to some filling machine care knowledge.
1: We must check some mechanical parts regularly, such as once every half a month or once a month. The inspection parts include: worm gear, worm, bolts on the lubrication block, bearings and other movable parts to see if these parts are flexible in rotation and wear , If defects are found, they should be repaired in time, and they should not be used reluctantly.
2: The installed machine should be used in a dry and clean room, and try not to use it in a place where the atmosphere contains acids and other gases that are corrosive to the body.
3: After the machine is used, it should be cleaned and then installed to make preparations for the next use.
4: The roller moves back and forth during work, please adjust the screws on the front bearing to the proper position. If the gear shaft moves, please adjust the screw behind the bearing frame to the proper position, adjust the gap so that the bearing does not make a noise, and the hand-turned pulley is properly tight. Too tight or too loose can cause damage to the machine.
